There are various types of glass that can be used to complement the furniture design. However, it is important to know the type of good glass and suitable for the furniture so the glass will work as expected.

Ordinary glass

Clear and transparent, pure, with no other materials added as a safety light or a silencer. This glass is usually used on windows or doors. Suitable for the small doors on the furniture or picture frames.

Energy Efficient Glass

There is a thin layer on one side (can be a sticker or films) that serves to reflect sunlight and reduce heat on the reverse side. This glass is usually used in the storied building. For use in furniture and interior are still very rare, only a few people use it for glass doors kitchen cupboard.

Safety Glass (Tempered Glass)

This type of glass will shatter when broken so as not to endanger the safety of users around it. This glass-making process must first be cut in accordance with the required size and refined. Then the glass will be heated at high temperatures (approximately 620 C) and refrigerated immediately. Safety glass is suitable for doors with a frame large enough and the top table dining table or guest room table or in places that have relatively high risk of rupture is not harmful.

Laminated Glass

As the name suggests, this glass is made by attaching two or more sheets of glass with a layer of adhesive film in the middle. This film layer (transparent) will bind the glass in case of rupture so that the glass does not immediately fall apart, but will remain a union. It’s very good for security use. Glass is used for laminated glass can be either regular glass or safety glass.

Glass Mirror

Usually made of glass with a thickness of between 4-6mm (Tempered or not), then on the back covered with liquid silver or aluminum. Mirrors for cupboard doors that are not equipped with the framework should use safety glass materials and applied with a special glue glass to the bottom ply that is safe for the user.

Install glass in wood frame Doors
Work is not as easy as what we see or imagine. With the characteristic of glass is very fragile and require extra care in handling, we should note some important things when installing the glass on the door of the wooden frame. Construction glass installation in wood frame can vary depending on the size of timber, wood frame materials, function and thickness of glass. If the glass with less than 4mm thick, you should use the framework of the system stickers, boards and rear door serves as a glass drag to be stable and not break, and then add paste trim around the glass to hold the glass remains in place. Thicker glass is more than 5 mm can be used solid wood frame parts in order to make a column for the placement of glass indentation. Then the glass was arrested with a small casing around a wooden framework.
How to safely install the glass on the door frame:
1. Place the wooden frame with a groove position is located at the top. Try to put it on the table that the width of at least equal to the area door or put it on a flat floor.

2. Pure the whole side of the glass so as not sharp.
3. Fit the glass sheet carefully, use a piece of cardboard or cloth to hold the glass.
4. Place the nail on the list before it mounted on wood (4 sides) in the framework of the door.
5. After the casing is attached, gently insert the nail with a hammer.
6. Should put a piece of cloth on the surface of the glass that installed wood trim. This is to avoid scratches on the glass surface due to movement of the hammer.
7. Insert the nail with a nail drip.

If you want to close the hole can use with wood filler. Should do before you install the glass, door frames should be set in order to complete a cupboard or a kosen and must be finishing previously.

Draker_Ster is the owner of the website which specialists in offering home improvement furniture.

Gain pragmatic tips in the sphere of how to install suspended ceiling – go through the page. The time has come when concise information is truly within one click, use this opportunity.