Finishing work could be internal and outside. The internal concerns daubing and painting of surfaces, to outside are joint pointing, daubing, stacking of stones in an outside layer, facing by a sheeting.
To warm garage and to protect from effect of an atmospheric precipitation, it is necessary to plaster it. Plaster represents a layer of the hardened solution, which is put in one or 3—4 procedures on a surface with consolidation and alignment.
Usually plasters discriminate: depends on purpose — on usual and special; on kinds of binding — on cement, cement-limy, …

Heat insulation and waterproofing are the major stages at garage building. They provide its safety and long serving.
Thermal insulation.
The thermal insulation usually consists of the basic heat-insulation layer, an external protective layer and fastenings.
The basic heat-insulation layer provides protection of a premise from penetration of coldness and consists usually of the materials possessing low heat conductivity.
The external protective layer protects the basic heat-insulation layer from damage, moisture hits. Protective blanket make from plaster solutions, synthetic foil, fibreglasses, asbestos-cement materials, etc.
Fastenings provide certain durability of heat insulation designs.
Before making the basic …

Building of garage is rather serious task for car owners, especially if your are not skilled builder and want to make everything yourself. In this case you have to find out as more as it possible information about garage building to know all details about erection of garage.
Ideal material for erection of garage walls is the brick.

The expense of a material on one square meter of wall brickwork at a thickness of a wall in a half-brick: a brick — 50 pieces, a solution — 35 liters. At a thickness …

At a choice of a place for garage building first of all pay attention to an arrangement of access roads. Entrances and departures from garages should provide the good outlook.
Entrances and departures it is the most expedient to have in relation to roads with a one-way traffic.
Garage it is desirable to arrange as it is possible closer to entrance on a lot. It can be approached closely to a site fencing so that gate was flush with fencing and left directly on street.
Chosen for building of garage the platform should …

For protection of garage against influence of an atmospheric precipitation you will need materials necessary for isolation: mastic, rolled, slabby, foliated.
Mastic materials are bitumen and tarry substances, which consist of similar filling. They will be necessary for gluing of rolled roofing materials, and also for a waterproofing.
Rolled materials — glassing paper, ruberoid, and roofing felt. By base forms they can be:
1. On a cardboard basis — roofing felt, ruberoid.
2. On a glass basis — glass ruberoid.
3. On the basis of a foil.
4. On the basis of an asbestine paper …

Garage building on the mixed technology can be carried out in two variants. In the first variant monolithic concrete and factory-made elements are applied within one floor, for example, columns and beams — from modular elements, and overlapping — from monolithic concrete. In the second — parts from monolithic concrete and modular elements, for example basement floors monolithic, and elevated — from modular elements erect the building.
The characteristic of last variant of building can be received directly from consideration of separate parts — monolithic concrete and modular elements — and …

For execution of building works on a construction area it is necessary to know well first of all, what materials and products will be necessary for you. External appearance, profitability, reliability and durability of construction depend on a choice and a way of application of building materials, correct use of their technical properties. In this article we will tell you about materials necessary at building of garage.
Stone materials. The basic materials used at building of garage are bricks and stones. They are required to you for a foundation walling …

The base type basically depends on a kind of soil, level of ground waters, size of loadings and requirements to a construction deposit, and also of some local conditions.
Soil conditions are defined by trial drilling that allows establishing necessity small or deep foundation of the base.
For economic reasons it is necessary to prefer the separate bases of shallow foundation. As cost of the bases does not almost depend on number of points loading of transfer, there is a freedom in choosing of step columns. The deep foundation, as …

Positive properties of steel designs of factory manufacturing can be used at building of garages; they are, as a rule, have small cross-section cutset and small building height, the big bay and small weight, provide easy and fast installation under any weather conditions, and also they have an opportunity of full dismantling of all components; an opportunity of full dismantling of steel construction allows to replace it to other place if the actual requirement for storage places considerably differs from planned requirement.. Steel designs often allow receiving economic decisions when …

Manufacturing of columns, beams and plates of overlapping at factory can be carried out simultaneously with erection of the bases of garages. However it is necessary to mean that at such technology of building, designing should be finished long before the beginning of works, and modification of the project, possible because of course of manufacture of monolithic works, at modular designs is excluded.
It is natural that considerable reduction of terms of building as at monolithic, and modular designs conducts to growth of expenses owing to the raised expense of …